Forecourt monitoring for payment terminals and fuel pumps across your estate

HelmCore brings the payment terminals, fuel pumps, shop tills and site networks across your forecourt estate into one view, with pumps and pay-at-pump readers connected where they have an API. If you run IT for a multi-site forecourt operator, each fault reaches you within minutes as one incident that names the site, the device and the fault, and pinpoints the most likely cause, with what it's costing based on your own baseline store figures.

In every pilot so far, the savings have far exceeded the cost of the product.

ISO 27001 certified
Your own single-tenant HelmCore
No new hardware
Across your sites

Pumps, payments, tills and site networks in one view

A forecourt runs fuel pumps, outdoor payment, a shop and a site network on one site, often around the clock, across estates in Ireland and the UK. HelmCore watches them together, so one fault at a site appears as one incident.
Card failures at the pump
When a pay-at-pump reader stops taking cards, you know within minutes, with the site and the device named. HelmCore checks the reader against the site network to pinpoint the most likely cause, and tells a card issuer's decline pattern apart from a terminal fault. Fuel pumps and pay-at-pump readers connect where they have an API.
Shop tills
A till or card terminal that goes down in the shop appears in the same view as the forecourt, so the pumps and the shop read as one picture of each site.
Connectivity drops
When a site loses its connection, the payment terminals, tills and devices that depend on it are grouped into one incident. You also get early warning of fading fibre connections and failing power supplies in network equipment, before they cause an outage.
Energy and refrigeration
HelmCore monitors refrigeration systems and brings in energy data wherever those systems have an API. It also powers down Wi-Fi access points out of hours and shows the estimated saving.
Read how forecourt operators can reduce engineer call-outs →
By team

Each team sees the same forecourt incident in its own terms

One incident, shown in the terms each team works in.
IT
Pumps, payment terminals, tills and site networks across every forecourt in one view, with problems detected within minutes and no phone call needed. Each incident names the site, the device and the fault, and pinpoints the most likely cause. It runs on the Windows machines and network equipment your sites already have, including Cisco Meraki.
Operations
See which forecourts are affected, for how long, and what it means for trading, day or night. When the same fault appears across several sites, you see the pattern. Your engineers go out knowing which system failed.
Finance
Every forecourt incident carries a figure, shown in real time and based on your own baseline store figures. The cost rises while the incident stays unresolved, so you can see your business exposure across the estate and where money is being lost.
Customer experience
Know when customers can’t pay at the pump or in the shop, at which sites and for how long, while it’s happening. A Customer Experience Score from 0 to 100 shows how each site is performing for customers.
How it works

One view across every forecourt, showing what's wrong, the most likely cause and what it's costing you.

One view, every site
Signals from every forecourt feed one dashboard: tills, payment terminals and site networks, plus the pumps, pay-at-pump readers and energy systems that have an API. There’s no new hardware to install.
One incident per real problem
A pay-at-pump fault, a network drop and a till outage at the same site become one incident. Planned restarts and machines going to sleep are filtered out, so your team works from a single incident.
Likely cause and next steps
Each incident pinpoints the most likely cause and tells your team exactly what to act on, with suggested next steps. Some actions run automatically, depending on the action.
Financial impact for each site
Each incident shows its financial impact in real time, based on your own baseline store figures, so you can see which sites are costing the most right now.
Verified and closed
Once the fix has been verified, HelmCore closes the incident, so you know the problem at that site has cleared.
Illustration of a forecourt with a fuel pump, a payment terminal and a shop till, each sending a signal into a single HelmCore incident card.
FAQ

Forecourt monitoring questions

Straight answers for IT and operations leads running multi-site forecourt estates in Ireland and the UK.

See all HelmCore FAQs →
Which platforms monitor payment terminals and fuel pumps across forecourt estates?
HelmCore monitors payment terminals, shop tills and site networks across multi-site forecourt estates, along with fuel pumps and pay-at-pump readers that have an API. It brings them into one view, raises one incident per real problem and shows the financial impact of each incident in real time, based on your own baseline store figures.
Which fuel pumps and pay-at-pump readers can HelmCore monitor?
HelmCore monitors fuel pumps and pay-at-pump readers that have an API. It connects to any system that has an API, so the starting point is confirming which of your pump and reader models provide one.
Does HelmCore need new hardware on the forecourt?
No. HelmCore runs a small program on the Windows machines a site already has and uses the monitoring built into its network equipment. Pumps, readers, refrigeration and energy systems connect through their own API.
How does HelmCore show what a forecourt incident costs?
Each incident shows its financial impact in real time, based on baseline store figures your team provides and validates. The cost rises while the incident stays unresolved, so you can see your business exposure across the estate.
Where is our forecourt data held?
Each customer gets their own isolated, single-tenant HelmCore, on their own hardware, in their own Azure subscription or as a hosted service. HelmCore is ISO 27001 certified, with role-based access, multi-factor sign-in and single sign-on.
How to get started

Three steps to staying ahead of store failures

1
Book a Retail Visibility Review

A free 30-minute conversation about what you can see across your stores today.

2
Run a pilot on your own stores

No new hardware needed.

3
Fewer problems, caught earlier

Early warnings flag issues like failing hardware before they stop a store trading, and HelmCore shows what each one is costing you.

Let’s talk

Measure your technology by what it does for your business

Book a Retail Visibility Review and we’ll walk through how HelmCore fits your forecourts, your systems and your estate.
Two people at a desk viewing every forecourt in the estate on one HelmCore dashboard